How to Restring a Milwaukee Battery Weed Eater: A Step-by-Step Guide

First identify the Kobalt model and follow its manual, since some use a pre-wound replacement spool while others accept bulk line. Remove the battery before opening the head and use only the specified line size.

Check the Stihl model manual for its head type. For a reloadable head, use the stated diameter and loading direction; for a replacement-spool design, install the specified spool with the battery removed.

Craftsman models vary by head. Use the line size and winding path listed for your model, keep the battery out while loading, and avoid winding beyond the spool capacity.

For the Milwaukee Easy Load head, align the arrows and eyelets, pass line through both sides evenly, then turn the cap to wind. Verify that your exact M18 trimmer uses this head before following those steps.

Fit a charged compatible battery, hold the safety lock as directed, then squeeze the trigger. Controls vary by model, so use its manual and keep the cutting head clear of people and objects.

Release the trigger, wait for the head to stop, press the battery latch and slide the pack out as shown in the tool manual. Do not pull the pack by its contacts or remove it while the head is moving.

With the battery removed, open the compatible head and either rewind the specified line evenly or replace its spool. The Craftsman manual identifies which approach and line diameter your model requires.

Use the model-specific reload instructions: align the spool marks or feed line through the stated openings, then wind in the marked direction. Refit the cap fully before inserting the battery.

Remove the battery, confirm the line diameter and head type in the manual, then reload the spool as marked. Keep both line ends even and reassemble the head before restoring power.