Gearjury may earn a commission from qualifying purchases made through links on this page.

Guide

How to Set Up a NETGEAR AC750 WiFi Range Extender

For the NETGEAR AC750 EX3110, use WPS for a button-based setup or follow the manual setup flow in a browser. Finish by placing the extender where it can still reach the router.

GGearjury editorial team · Updated October 18, 2026· 6 min

How to Set Up a NETGEAR AC750 WiFi Range Extender

Identify the NETGEAR AC750 model

This guide covers the EX3110 AC750 WiFi Range Extender. Check the label on the device before starting because setup steps and indicator meanings can differ across NETGEAR models.

Choose WPS or browser setup

For WPS, plug the extender in near the router, wait for it to start, then press the router’s WPS button and the extender’s WPS button as described in the EX3110 manual. If the router has no WPS function or you prefer guided configuration, connect to the extender’s setup network and follow NETGEAR’s browser instructions.

Complete the connection to the router

During browser setup, select the home Wi-Fi network and enter its current password carefully. Allow the extender to finish applying settings; do not unplug it while its indicators show that it is still starting or connecting.

Move the extender to a useful position

After configuration, place the EX3110 between the router and the area with poor reception. Use its indicator guidance and retain a reliable link to the router; a position inside the dead zone cannot relay a strong connection.

Connect devices to the extended WiFi

The extended network may use the router’s name with an extender suffix, depending on the setup choices. Select the appropriate network on the computer or other device and enter the Wi-Fi password. The EX3110 documentation also describes its Ethernet connection for a wired client.

If the NETGEAR EX3110 will not connect

Check that the router password is correct, move the extender closer during setup, and restart both devices if needed. If the setup network is missing or the extender was previously configured, consult the EX3110 manual for reset and manual-setup instructions.

Common questions

Questions before you buy

How do I set up a NETGEAR AC750 WiFi range extender model EX3110?

Connect it to the router using WPS or NETGEAR’s browser setup, then move it to a location that still receives a good router signal. Follow the EX3110 manual for indicator and button details.

Can I set up a NETGEAR AC750 extender without WPS?

Yes. Use the manual browser setup described in the EX3110 user manual, connect to its setup network and follow the prompts to select your router’s Wi-Fi.

What is the default WiFi name for the NETGEAR EX3110?

The EX3110 manual lists NETGEAR_EXT as its factory-default extender network name. If settings have been changed, use the current network details or reset only as directed by the manual.

Where should I put my NETGEAR AC750 range extender?

Put it between the router and the weak-signal area, where it can maintain a stable connection back to the router. Use the extender’s indicators and adjust placement if connection quality is poor.

Sources and how we chose