Rear Dash Cam Installation: Placement, Wiring and Setup

Mount it high and near the centre of the rear glass, within the cleared area of the rear wiper where possible. Check that defroster lines, tint edges and trim do not block the lens.

Do not route a cable over or in front of a curtain airbag. Follow the vehicle service guidance or use a qualified installer if the safe path behind trim is unclear.

Use the existing rubber wiring conduit only if the connector fits without force and leave enough slack for full hatch movement. Avoid pinching the cable or drilling unless the camera maker provides a suitable method.

Not for ordinary driving recording if it receives power from the front unit. A compatible hardwire kit may be required for parking recording, depending on the system.