Switch the headlamp off
Turn off the lamp and disconnect it from charging. Remove batteries only if the manual says it is safe and practical to do so.
Best picksBest Meat Thermometers in the UK for 2026
Best picksBest WiFi Extenders in the UK: Compare Five Practical Options
Best picksThe Best Dashcams in the UK for 2026
Best picksBest Headlamp Torches in the UK: Five Choices for 2026
Best picksBest Air Purifiers in the UK for Different Rooms and Needs
Best picksBest Radar Detectors in the UK: Models Compared for 2026
Best picksBest Portable Air Coolers: Five Models to Compare for 2026
Best picksBest Winter Gloves in the UK: Five Activity-Based Choices for 2026Gearjury may earn a commission from qualifying retailer links. We select content independently.
Guide
Use a clean soft cloth and the care instructions for your exact lamp. Avoid solvents and abrasives unless the manufacturer explicitly permits them.

Turn off the lamp and disconnect it from charging. Remove batteries only if the manual says it is safe and practical to do so.
Blow away loose dust or lift it with a clean soft brush. Rubbing grit across the lens can leave marks.
Use a clean microfibre or other soft lint-free cloth. For smears, lightly dampen the cloth with water rather than spraying liquid directly onto the lamp.
Do not use abrasive pads, household glass sprays or solvents unless the manufacturer approves them for that lens material and coating.
Dry the surface and check the lens, seals and charging port for damage before use. If moisture entered the housing, follow the maker guidance before switching the lamp on.
Common questions
Switch the lamp off and disconnect or remove its battery if the manual allows. Wipe the lens with a clean soft cloth; use a slightly damp cloth for residue, then dry it before use.
Check the manufacturer guidance first. Solvents can damage lens coatings or plastic, so a soft cloth and mild soap solution are safer starting points.
Do not polish a coated lens unless the maker approves that method. Deep scratches or a damaged seal may require replacement rather than abrasive treatment.
Keep water away from the charging port and battery compartment, use a soft cloth, and follow the care instructions for the exact lamp.