Independent buying guidance · UK editionHow we work
Gearjury
All categories
All categories
Best picksBest WiFi Extenders in the UK: Compare Five Practical Options
Best picksThe Best Dashcams in the UK for 2026
Best picksBest Portable Air Coolers: Five Models to Compare for 2026
Best picksBest Meat Thermometers in the UK for 2026
Best picksBest Headlamp Torches in the UK: Five Choices for 2026
Best picksBest Winter Gloves in the UK: Five Activity-Based Choices for 2026
Best picksBest Radar Detectors in the UK: Models Compared for 2026
Best picksBest Value Cordless Strimmers in the UK (2026)
Best picksBest Air Purifiers in the UK for Different Rooms and Needs
United KingdomEnglish

Gearjury may earn a commission from retailer links. Setup details are drawn from Vodafone support material.

Guide

How to Set Up a Vodafone Super WiFi 7 Booster

Pair the Super WiFi 7 Booster near your Ultra Hub 7 first, then move it towards the coverage gap. Vodafone’s LED guide explains flashing purple and blue during setup.

How to Set Up a Vodafone Super WiFi 7 Booster
01

Check the Hub is online

Confirm that your Ultra Hub 7 is powered and connected to broadband before pairing. Vodafone’s setup instructions say to place the Booster close to the Hub for the initial connection; do not begin with the extender already at the edge of coverage.

02

Pair the Booster beside the Ultra Hub 7

Plug the Super WiFi 7 Booster into a nearby socket and wait for it to start. Vodafone’s instructions for Ultra Hub 7 say to press and hold the Hub’s WPS button, then press and hold the Booster’s WPS button. Allow pairing to finish and check that the Booster reaches its connected light state.

03

Move it towards the weak-coverage area

After pairing, unplug the Booster and place it between the Hub and the room where WiFi drops away. It needs a usable link back to the Hub, so if the connection indicator reports a weak link, move it closer and check again.

04

What flashing purple means

Vodafone lists flashing purple as pairing in progress. A solid purple light means the extender is not connected to the WiFi network; Vodafone advises pressing the WPS buttons to pair it. Wait for pairing to complete rather than relocating it while the process is underway.

05

What flashing blue means

Vodafone says flashing blue indicates power-up, booting or a factory reset in progress. Give the Booster time to start. If it remains in that state or changes to an error indication, check Vodafone’s light guide and connection troubleshooting before repeating setup.

06

If pairing fails

Check the Hub has internet access, bring the Booster close to it and retry the WPS sequence. Vodafone’s troubleshooting page describes a factory reset using the reset pin held for the stated interval, followed by a restart and fresh setup; use that only if a normal retry has not worked. Contact Vodafone if the error persists.

Common questions

Questions before you buy

How do I set up a Vodafone Super WiFi 7 Booster?

Start with the Ultra Hub 7 online and place the Booster nearby. Follow Vodafone’s WPS pairing sequence on the Hub and Booster, wait for pairing to complete, then relocate the Booster towards the coverage gap.

Why is my Vodafone Super WiFi 7 Booster flashing purple?

Vodafone identifies flashing purple as pairing in progress. A solid purple light means it is not connected; use the WPS buttons on the Hub and Booster as directed in Vodafone’s setup guide.

Why is my Vodafone WiFi 7 Booster flashing blue?

Flashing blue means the Booster is powering up, booting or undergoing a factory reset, according to Vodafone. Allow it to finish; if it does not settle, consult the light guide and troubleshoot the connection.

Where should I place the Vodafone Booster after pairing?

Put it between the Ultra Hub and the area with poor reception, where it can still maintain a good link to the Hub. If Vodafone’s indicator shows a weak connection, move it nearer the Hub.

What does a solid purple light mean on the Super WiFi Booster?

Vodafone says solid purple means the extender is not connected to the WiFi network. Try pairing with the WPS buttons and check the official setup instructions for your Hub.

Sources and how we chose