Best picksBest Meat Thermometers in the UK for 2026
Best picksBest WiFi Extenders in the UK: Compare Five Practical Options
Best picksThe Best Dashcams in the UK for 2026
Best picksBest Air Purifiers in the UK for Different Rooms and NeedsGearjury may earn a commission from retailer links. This does not affect our editorial explanations.
Guide
For many NETGEAR extenders, setup is a choice between WPS pairing and a browser-based wizard. Start near the router, follow the instructions for your exact model, then move the extender only after it connects.
Check the label and manual for the exact model and confirm that you have the router’s WiFi name and password. If the extender was previously configured, NETGEAR advises resetting it before starting over. Put it in the same room as the router for initial setup; you can relocate it after pairing.
If both devices support WPS, set any mode switch to Extender, power the unit near the router and wait for it to start. Press the extender’s WPS button, then press the router’s WPS button within the time specified in the manual. Wait for the router-link indicator to show a connection. Button timing and LED meanings vary by model, so use its guide.
Connect a phone or computer to the extender’s temporary network, open a browser and follow the NETGEAR setup wizard. Select your existing home network and enter its WiFi password when prompted. Complete the remaining screens and wait for confirmation. The exact local address and prompts can differ between models.
For an AC1200 model such as NETGEAR EX6120, use the model-specific quick start guide or manual. The EX6120 documentation describes a browser setup flow with a choice of WiFi range extender or access point mode. Do not assume every NETGEAR AC1200 model has identical menus or buttons.
NETGEAR EX3700 is an AC750 model with WPS instructions in its user manual. For setup, follow the manual’s sequence for linking it to the router, and check the router-link light before unplugging it. If WPS is unavailable or fails, use the supported browser setup instructions for this model.
After setup, place the extender between the router and the area with weak coverage, where it can still receive a reliable router signal. Reconnect power and check the router-link indicator. Join the extended WiFi name shown by the setup process; depending on the model it may match the home network or include a suffix.
Check the router password, move the extender closer to the router and repeat setup. Confirm that the router itself has internet access, then review the model’s LED definitions and firmware guidance. If the extender was used before, a factory reset may be needed; use the reset instructions for your model.
Common questions
Use the setup method in your exact model’s manual. For NETGEAR EX6120, the quick start guide describes connecting to the extender and completing its browser wizard; compatible routers may also allow WPS setup.
Follow the EX3700 manual’s WPS steps if your router supports WPS, or use its browser-based setup instructions. Complete pairing near the router, confirm the link, then move the extender to a position with a stable signal.
Yes, use the browser-based setup flow supported by your model. Connect to the extender’s temporary WiFi network and follow the on-screen instructions to select your router and enter its password.
Choose a position between the router and the weak-coverage area where the extender still receives a good router signal. Check the router-link indicator after moving it and shift it closer if the link is poor.
Keep exploring
TP-Link RE315 is a practical starting point for a standard indoor dead zone. Consider a Wi-Fi 6 device for newer kit, outdoor-rated hardware for a garden, or powerline where a wireless hop struggles.
TP-Link sells plug-in repeaters and powerline kits. Check EasyMesh support, Ethernet needs and the exact UK hardware revision before buying.
Sky has different booster products for different broadband generations. Sky Max customers may use a Max Pod; check your account and hub-specific help before seeking a third-party extender.
A WiFi extender can carry your router signal further, but placement and backhaul matter. Choose a plug-in repeater for a nearby dead zone, powerline WiFi for difficult layouts, or an outdoor-rated unit for a garden.